Photo Tex Repositionable Fabric / EX (AQ)

Kodak Photo Tex Repositionable Fabric Opaque

  • 50% stronger adhesive than original Kodak Photo Tex Extra Strength
  • bright white
  • utilize on more textured surface to ensure adhesion
  • compatiable with pigment, water-based, latex inks
  • exceptional imagery and color pop
  • great for overlapping and hiding dark color walls




40-45% polyester, 40-45% pulp-cellulose


13 mil (557kg/m): Base 7 mil, liner 6 mil


305 gsm

Printer/Ink Compatibility

Canon, Epson, Hewlett-Packard, Mutoh, Mimaki, and Roland with pigment-based inks.

Software Setting

Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application.

Color Matching

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.

Finishing/Post Processing

Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.


The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application.

Optimal Service Environment

For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F

Handling Recommendations

Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.

Ideal Storage Conditions

50-80° F, 35-65% R.H. A controlled environment is recommended. Store in original packaging.

Shelf Life

Greater than 1 year from the BMG ship date when stored in proper conditions.


Product Performance & Suitability: All of the descriptive information and recommendations for the use of Kodak products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by BMG. All Purchasers of Kodak products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor the manufacturer shall be liable either in the tort in contract for any loss or damage, direct, incidental or consequential (including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect in agreement signed by officers of seller and manufacturer.

Did this page help you?