Kodak Backlit Film, Glossy / 8mil / Solvent is a gloss-coated polyester backlit film used to produce vibrant light box display applications. The heavyweight front-print backlit is compatible with all solvent and low-solvent based inks. This durable polyester offers excellent print handling and finishing characteristics, quick dry time and exceptional color saturation.
|Printer/Ink Compatibility||Compatible with solvent and eco-solvent inks.|
|Software Settings||Please refer to www.brandmangagementgroup.com for ICC profiles for some printers.|
|Light-fastness||Inkjet ink fading time is based on the inks you use and print display environment. For light-fastness data and to determine an ink’s suitability for the application, contact the ink manufacturer.|
|Finishing/Post Processing||It is always recommended that a protective laminate be applied after printing. Hand applying a laminate is not recommended. Pressure-sensitive can be used. Before applying the laminate, allow the image to dry for 24 hours.|
|Optimal Service Environment||72° F (21° C), 50% R.H. For end use: 0-300° F.|
|Handling Recommendations||It is suggested that you use the take-up reel with this product as the product could have a slight static charge that can cause the product to stick to the post heaters. It is also recommended that media clips are used to keep the media from bunching up if static is present. Avoid touching the coated surface and use cotton gloves when handling inkjet coated materials. Rolls of Kodak inkjet media come with the coated side facing out.|
|Ideal Storage Conditions||70° F (21° C), 50% R.H. (a controlled environment is recommended); store in original packaging.|
|Shelf Life||1 year from the BMG ship date when stored in proper conditions.|
Product Performance & Suitability: All of the descriptive information and recommendations for the use of Kodak products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by BMG. All Purchasers of Kodak products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor the manufacturer shall be liable either in the tort in contract for any loss or damage, direct, incidental or consequential (including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect in agreement signed by officers of seller and manufacturer.
Updated less than a minute ago