Rapid-Dry Self-Adhesive Glossy Poly Poster / 6 mil

KODAK Rapid Dry Glossy Poly Poster is a 6-mil film designed for aqueous-based printers using both dye and pigmented inks. It is one of the few glossy PSA (pressure-sensitive adhesive) films ideal for long-term, high-impact indoor signage that can also be used for
short-term outdoor signage. It has a specially-designed adhesive that makes it easy to install and is cleanly removable for up to 90 days. After 90 days the adhesive will become permanent.

Properties

Specifications

Material

Polypropylene

Gauge

6.5 mil

Gauge of Adhesive

1 mil

Release Liner Gauge

1.5 mil

Opacity

99.47% (CIE)

Whiteness

88 (CIE)

Gloss Level @ 60°

46.5

Adhesive

Permanent solvent-based acrylic

180° Peel Force

13.97 N/in. to stainless steel

Printer/Ink Compatibility

Encad, Canon, ColorSpan, Hewlett-Packard, Mimaki, Mutoh, Roland, & Epson Series dye and pigment based inks.

Software Settings

When using this material utilize the UCR (Under Color Removal) technique that replaces composite black (CMY) with the appropriate amount of black ink. To optimize print quality, printers should be set for the highest print quality and media selection should be set on “heavy coated.” Ink coverage up to 350% is recommended.

Handling Recommendations

Due to the absorptive nature of the coating, you should avoid touching the coated surface. It’s always recommended that cotton gloves be used when handling ink jet coated materials. Rolls of Kodak film are supplied with the coated side facing out.

Color Matching

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.

Finishing/Post Processing for Trade Show Graphics

Always use pressure sensitive laminates. Hand applying the laminate is not recommended. Before applying the laminate, allow the image to dry for 24 hours. The adhesive on this product and most laminates should cure for at least two hours before trimming at a minimum; 24 hours is ideal.

Lightfastness

The fading time of inkjet ink is a direct result of the inks that you choose to use and the environment where the print is displayed. All dye-based inks fade noticeably under direct sunlight, in interior applications where direct sunlight may fall on an image, and/or where fluorescent or other UV lighting is present. Although the fading process is inherent with all inkjet inks, certain UV-enhanced inks, pigment-based inks, and UV-inhibiting laminates will extend the longevity of an image. Contact the ink manufacturer to determine suitability for a particular application.

Optimal Service Environment

For printing: 60-80° F, 50% Relative Humidity.

Service Temp. Range

-40° - 176° F (-40°C to 80°C)

Ideal Storage Conditions

70°F (21°C), 50% R.H. (a controlled environment is recommended); store in original packaging.

Shelf Life

1 year from the BMG ship date when stored in proper conditions.

📘

Product Performance & Suitability: All of the descriptive information and recommendations for the use of Kodak products should be used only as a guide. Furnishing such information and recommendations shall in no event constitute a warranty of any kind by BMG. All Purchasers of Kodak products shall independently determine the suitability of the material for the purpose for which it is purchased. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor the manufacturer shall be liable either in the tort in contract for any loss or damage, direct, incidental or consequential (including loss of profits or revenue) arising out of the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect in agreement signed by officers of seller and manufacturer.